Standard maintenance of the gauge should be performed every 3 months or 1,000 bore measurements. Please do not attempt to disassemble your bore gauge.
The Following routine maintenance is suggested every 3 months :
The Following routine maintenance is suggested every 3 months :
-
Check the extent of flats on shoe contacts
-
Clean, polish or turn the balls, whichever is applicable, or replace
-
Examine abnormal angular play between shoe and bottom section, replace the shoe
-
Examine bell crank for wear or damage on edge of ground face and replace if necessary
-
Examine the top plunger for wear and/or damage
-
Clean and oil all parts carefully
No comments:
Post a Comment